How to remove a card from a holder without damage
A TopRipz, a card saver, or a toploader.
Work over a clean, soft surface. Hold the penny sleeve, not the corners of the card. Let the card slide. Do not pry the holder open.
On a TopRipz, cards release effortlessly with the patent-pending RipTag, or can be removed like a standard loader. A TopRipz has a rigid back and a soft/flexible front. Silk finish for smooth handling. It fits cards up to 50pt. Shop a TopRipz in the shop.
Steps
These steps cover a TopRipz, a card saver, and a toploader.
- Pull the RipTag on a TopRipz. If the TopRipz has a RipTag Grading Strip, grip the tab and pull once. The RipTag Grading Strip is optional, patent-pending, and one-time use. One pull and the card is out, then the grader recycles the strip, with no prying and no risk of damage from handling.
- Or slide it out like a standard loader. With no strip, slide the card out the way you would a standard loader. Silk finish for smooth handling, so the card goes in easily and stays in a secure hold. The back is a rigid back. The front is a soft/flexible front.
- Slide a card out of a card saver. Set the card saver on a soft cloth. Pinch the penny sleeve near the open edge, not the card corners. Flex it slightly and slide the card out. If the card drags, flex a little more instead of pulling harder.
- Slide a card out of a toploader. Leave the penny sleeve on the card. Turn the open end toward a soft cloth and tap the closed end lightly until the card reaches the lip. Pinch the penny sleeve and slide the card out. Do not bend the toploader open, and do not use a blade.
If the card is going out for grading
Put it in a TopRipz before you ship. The grading kit ships 10 TopRipz in a secure shipper with a microfiber cloth, a foam insert, a plate, and a prepaid return label. Packing for CGC grading is covered in how to prepare and submit cards for CGC grading. For the comparison, see semi-rigid card holders vs toploaders. More questions are on the FAQ.
FAQ
How do I get a card out of a card saver?
Set the card saver on a soft cloth. Pinch the penny sleeve near the open edge, not the card corners. Flex it slightly and slide the card out. If the card drags, flex a little more instead of pulling harder.
How do I remove a card from a toploader?
Leave the penny sleeve on the card. Turn the open end toward a soft cloth and tap the closed end lightly until the card reaches the lip. Pinch the penny sleeve and slide the card out. Do not bend the toploader open, and do not use a blade.
How do I remove a card from a TopRipz?
Cards release effortlessly with the patent-pending RipTag, or can be removed like a standard loader. The RipTag Grading Strip is optional, patent-pending, and one-time use. One pull and the card is out, then the grader recycles the strip, with no prying and no risk of damage from handling. With no strip, slide the card out. Silk finish for smooth handling. A TopRipz fits cards up to 50pt.
What do I do with the RipTag Grading Strip after one pull?
Recycle the strip. It is optional, patent-pending, and one-time use. When the card is opened for CGC grading, the grader pulls it once and recycles the strip.